technical data sheet rpc-1.85 panel jack 08K421-271S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tole rances according to iso 2768 m-h interface according to iec 61169-32 mechanically compatible with rpc-2.40 documents assembly instruction 02 a3 panel piercing b 71 material and plating connector parts material plating center contact beryllium copper gold, min. 1.27 m, over chemical nickel outer contact stainless steel passivated dielectric peek solder sleeve brass gold, 0.1 m min.
technical data sheet rpc-1.85 panel jack 08K421-271S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fax: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 frequency dc to 65 ghz return loss 20 db, dc to 65 ghz insertion loss 0.05 x db insulation resistance 5 g center contact resistance 4.0 m outer contact resistance 2.5 m test voltage 500 v rms working voltage 150 v rms rf-leakage 100 db up to 1 ghz - limitations are possible due to the used cable type - mechanical data mating cycles 500 center contact captivation 20 n coupling test torque 1.65 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range -40c to +85c thermal shock iec 61169-1, subclause 9.4.4 corrosion iec 61169-1, subclause 9.4.6 vibration iec 61169-1, subclause 9.3.3 shock iec 61169-1, subclause 9.3.14 moisture resistance iec 61169-1, subclause 9.4.3 2002/95/ec (rohs) compliant tooling n/a suitable cables ut 85 / rtk-fs 085 / rtk-flex 405 packing standard 1 pce in bag weight 13.6 g/pce draft date approved date rev. engineering change number name date herbert babinger 25/08/04 krautenbacher j. 19/10/06 b00 06-0478 b. dandl 19/10/06 while the information has been carefully compiled to the best of our knowled g e, nothin g is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infrin g e existin g patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|